BRIDGEMAN’S FURNACE

Description: BRIDGEMAN’S FURNACE   

Bridgeman Furnace is a Vertical Tripple Zone furnace, with 99% pure alumina tube. With 80-85mm ID tube and total length 700mm. Outer made of CR sheet Powder,coated.

Temperature max. upto 1200°C. Other Sizes as per requirement.

SPECIFICATION:

* Dual Heating Zone of 250mm each

* Cold zone in center of 50mm.

* 99% pure Alumina tube of 80-85dia ID x 700mm length.

* Vertical Furnace, with both sides open.

* Ceramic end caps to close the tube ends as and when required

* Max. Working temp. 1150  C

* Temperature sensors will be of 'S' Type thermocopules.

* Outer body made of CR sheet Powder coated

* Heating by Silicone Carbide heaters of suitable capacity. with all necessary clamps and fittings.

* The Vertical movement of the sample will be provided by a High precision motor with a fine screw rod.

* The movement will be vibration free across the entire operating range

* The speed can be varied from 0.1mm/min. to 10mm/min. and stroke length from 1mm to full length.

* Seperate control unit with 2 independant profile temperature controllers.

* Controllers have the facility for Multi-Step profiling.

* Movement control by an independent controller with continuos display of speed, stroke, run time and remaining time.

* Provision to integrate the entire operation through a PC

* Separate control unit housing all control units.

* Operation on 440V, 3 Phase, 50Hz.only.

SAFETY FEATURES

* It has safety features like:Home and end sensors for movement.

* VAF meter to monitor voltage, current and frequency for heater life monitoring.

* Automatic Heater cutoff on sensor failure

* 1 Phase preventor.

* Hot or cold run option.

REQUIREMENTS

INDUSTRIAL SOCKET OR 4 POLE MCB 64 amps rating

OPTIONAL ACCESSORIES (AT EXTRA COST)

* Spare Ceramic Board end caps

* Spare Thermocouple

* Spare 99% Alumina Tube

* Spare heating elements (Set of 4 elements)