BOMB CALORIMETER AUTOMATIC
Code: 11007-02
Description: APPLICATION
The “CI” Bomb Calorimeter can be used to measure the heat generated from several applications. The calorific value of the following groups of materials can be measured :- Building Materials, Coal, Coke, Fuels (gasoline, kerosene, diesel and gas (turbine fuels), Hydrocarbon fuel, Food supplements, Crops, Waste and refuse combustible materials, etc., USAGE UP TO 40000 CALORIFIC VALUES.
COMPLIANCE : ASTM D240; D 4809; D5865; D1989; E711; ISO 1928; DIN 51900; BS 1016 ; IS 1350-2
MODELS
11007-00 BASIC - MICROPROCESSOR BASED WITH TEMP. LOGGING
11007-01 AUTOMATIC WITH SERIAL / PRINTER INTERFACE
11007-02 FULLY AUTOMATIC WITH TOUCH SCREEN, PC AND BALANCE INTERFACE
FEATURES
* Automatic nichrome check and firing
* Automatic test sequence
* Weight data feeding through keypad.
* Audio visual alarm and end of test indication
* Sensor open detection with alarm
* Temperature scanning resolution of 0.01°C
* Soft touch keypad with 15 keys.
* Self explaining messages for ease of testing.
* Automatic filling and removal of water from test container.
* Automatic pressure charging. The user only connects a quick turn coupling to the test vessel and the oxygen is filled to the preset value. If, not an error message is displayed.
* Automatic water equivalent determination and calorific value calculation.
* Reduced water consumption and higher number of test with the same water
* Interface to printer via RS232 for report printing with company name (factory set), date, timing and other test details.
* User selectable units for temperature, pressure and calorific value
* User settable temperature scanning interval for testing of samples with calorific value to very high calorific values.
* Automatic monitoring of water level and alarm if water level is low or water temperature is high.
* 16 x 4 line alpha numeric lcd display with back light for easy monitoring
* Ergonomically designed incorporating all the necessary systems occupying minimum table area.
* Leak and maintenance free quick charging and discharging setup.
* Reduced operating time and cost due to lesser number of operations and spares.
* Inbuilt lid stand
* Inbuilt nichrome wire length measurement and cutting system.
* Colour touch screen user interface
* Balance interface for automatic transfer of weights to the unit.
* PC interface for data logging and full system control via computer.
* User selectable temp. resolution of 0.01°C,0.001°C
* User set able company name and address for test report
* Multi point calibration/water equivalent determination. The user can set from 1 - 5 times. The system has to determine water equivalent and then the system automatically records these values and averages the value at the end of the last test.
* Possible for pre-setting correction values for the NET calorific value to be calculated and displayed.
* Automatic Pre/Post/Process diagnostic features
* Automatic System self diagnostic feature for easy maintenance
* LAN enabled for seamless operation and REMOTE support
* Automatic/Electric Top Lid operation and holding
