FOAMING CHARACTERISTICS TEST APPARATUS
Code: 11032
Description: FOAMING CHARACTERISTICS TEST APPARATUS,Compliance:ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213, NF T60-129
Application:To determine the Foaming of lubricating oils in applications involving turbulence, high speed gearing or high volume pumping, which can cause inadequate lubrication,
cavitation, overflow and premature oxidation.
INSTRUMENT DESCRIPTION AND CONSTRUCTION
Temp. Range : 24ºC & 130ºC,Accuracy: + 0.2ºC,Resolution : 0.1ºC,Performs tests at 24°C and 93.5°C. Consists of two constant temperature baths with1000mL test cylinders,(certified) diffusers, air delivery tubes, and flow meters.Supplied with uP based temperature controls, S.S .immersion heaters and circulation stirrers to maintain temperature uniformity. Dual
LED displays process and set point temperature values. Test cylinders are held in place by SS weights. 24°C bath has coils for circulating exit air from the 94ºC and a separate coil for circulating cooling water. All controls are enclosed in a sturdy bottom frame made of C.R sheet with elegant powder coated finish.
DIMENSION: 900W X 500D X 850H (mm)
NET WEIGHT:
GROSS WEIGHT:
MODELS
11032-00 With manual Glass/Acrylic Rotameter
STANDARD ACCESSORIES/PARTS
11032-00 Base frame with controllers 1 set
11032-01 Glass Test Baths 2 nos.
11032-02 Bakelite Top Lids with circulation coils, Stirrer and heaters 2 set
11032-03 Diffuser stone with tube and Rubber cork 2 set
xxxx-xx Air Compressor 1 nos.
xxxx-xx Silicone Tube 2 Meter
11032-04 Measuring Cylinders 2 nos.
11032=05 SS Sinker Weights 2 nos.
11032-06 Glass/Acrylic Flowmeters 2 nos.
OPTIONAL ACCESSORIES
11032-04 Measuring Cylinder 1000ml
11032-07 Certified Gas Diffuser
11032-06 Glass/Acrylic Flowmeters
11032-01 Glass Test Bath
11032-08 Spare High temp. bath heater
11032-09 Spare low temp. bath heater
11032-10 Spare Stirrer Motor
11032-11 Spare Moisture Trap
xxxx-xx Wet gas flow meter
xxxx-xx Cryostat for low temp. bath cooling
