Name: TIC LIQUID LIMIT DEVICES
Code: 18023
Description: TIC LIQUID LIMIT DEVICES, Used to determine the moisture content at which clay soil pass from a plasticity to a liquid state. As per IS:2720 Part V. It consisting of a removable brass bowl on rubber pad & with one casagrande grooving tool, one ASTM grooving tool and counter to register the number of blows.
Code: 18023
Description: TIC LIQUID LIMIT DEVICES, Used to determine the moisture content at which clay soil pass from a plasticity to a liquid state. As per IS:2720 Part V. It consisting of a removable brass bowl on rubber pad & with one casagrande grooving tool, one ASTM grooving tool and counter to register the number of blows.
Name: TIC SOIL CONE PENETROMETER
Code: 18026-00
Description: TIC SOIL CONE PENETROMETER, The percentage moisture contents determined when a cone with half angle of 15o 30 minutes under a total sliding weight of 148gm penetrates 25mm gives the liquid limit.
Code: 18026-00
Description: TIC SOIL CONE PENETROMETER, The percentage moisture contents determined when a cone with half angle of 15o 30 minutes under a total sliding weight of 148gm penetrates 25mm gives the liquid limit.
Name: PYKNOMETER (PARTICLE DENSITY)
Code: 18027
Description: PYKNOMETER (PARTICLE DENSITY), As per IS 2386 (Part -3), Used for determination of specific gravity of sands and fine aggregate. It consists of a glass jar of 1 liter. capacity, with brass cone, locking ring and rubber Seal.
Code: 18027
Description: PYKNOMETER (PARTICLE DENSITY), As per IS 2386 (Part -3), Used for determination of specific gravity of sands and fine aggregate. It consists of a glass jar of 1 liter. capacity, with brass cone, locking ring and rubber Seal.
Name: PROVING RING
Code: 18028
Description: PROVING RING, Capacity: 2.5KN, 5.0KN, 10KN, 20 KN, 50KN, 100KN, 200KN, 250KN, 300KN, 500KN, 1000KN, 2000KN
Code: 18028
Description: PROVING RING, Capacity: 2.5KN, 5.0KN, 10KN, 20 KN, 50KN, 100KN, 200KN, 250KN, 300KN, 500KN, 1000KN, 2000KN
Name: PLASTIC LIMIT APPARATUS
Code: 18029
Description: PLASTIC LIMIT APPARATUS, As per IS 2720 (Part - V), To find the moisture content at which it has plasticity. Glass plate 20cm x 15cm having ground ends and one side frosted. Brass or stainless steel rod 3 mm dia. x 150 mm long-2 nos.
Code: 18029
Description: PLASTIC LIMIT APPARATUS, As per IS 2720 (Part - V), To find the moisture content at which it has plasticity. Glass plate 20cm x 15cm having ground ends and one side frosted. Brass or stainless steel rod 3 mm dia. x 150 mm long-2 nos.
Name: PROCTOR NEEDLE (SPRING TYPE)
Code: 18031-00
Description: PROCTOR NEEDLE (SPRING TYPE), It consists of a spring loaded housing, a plunger calibrated to read 0-40 kg x 1 kg and a handle.
Code: 18031-00
Description: PROCTOR NEEDLE (SPRING TYPE), It consists of a spring loaded housing, a plunger calibrated to read 0-40 kg x 1 kg and a handle.
Name: PROCTOR NEEDLE (HYDRULIC)
Code: 18031-01
Description: PROCTOR NEEDLE (HYDRULIC), This is identical to (Spring type) except that the penetration pressure on the needle is conveyed through a hydraulic system on a pressure gauge 0 - 70 kg x 1 kg. This system permits a greater control over the rate of better visibility of load indication
Code: 18031-01
Description: PROCTOR NEEDLE (HYDRULIC), This is identical to (Spring type) except that the penetration pressure on the needle is conveyed through a hydraulic system on a pressure gauge 0 - 70 kg x 1 kg. This system permits a greater control over the rate of better visibility of load indication
Name: PROCTOR MOULD AND RAMMERS
Code: 18032-00
Description: PROCTOR MOULD AND RAMMERS, As per IS:2720 100 mm dia x 127.3 mm Ht., Capacity: 1000cc
Code: 18032-00
Description: PROCTOR MOULD AND RAMMERS, As per IS:2720 100 mm dia x 127.3 mm Ht., Capacity: 1000cc
Name: RAPID MOISTURE METER
Code: 18033
Description: TIC RAPID MOISTURE METER, The unit consists of a pressure vessel with clamp for sealing cap. Rubber sealing gasket, Pressure gauge 0- 25%, calibrated on the wet weight basis, a Counter poised balance for weighing sample, a Scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of steel balls for through mixing.
Code: 18033
Description: TIC RAPID MOISTURE METER, The unit consists of a pressure vessel with clamp for sealing cap. Rubber sealing gasket, Pressure gauge 0- 25%, calibrated on the wet weight basis, a Counter poised balance for weighing sample, a Scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of steel balls for through mixing.
Name: FIELD DENSITY (SAND REPLACEMENT)
Code: 18034
Description: FIELD DENSITY (SAND REPLACEMENT), As per IS:2720, Sand Pouring Cylinder with calibrating can & metal tray of 30cm x 30cm with centre hole of 10cm.dia.
Code: 18034
Description: FIELD DENSITY (SAND REPLACEMENT), As per IS:2720, Sand Pouring Cylinder with calibrating can & metal tray of 30cm x 30cm with centre hole of 10cm.dia.
