Name: BITUMEN EXTRACTOR
Code: 18077
Description: BITUMEN EXTRACTOR, BITUMEN EXTRACTOR ELECTRICALLY OPERATED, Same as above, but shaft is rotated by an electric Motor and belt pitch pulley system. Variable speed 2000 RPM to 3500 RPM. Operated on 230V, AC Mains.
Code: 18077
Description: BITUMEN EXTRACTOR, BITUMEN EXTRACTOR ELECTRICALLY OPERATED, Same as above, but shaft is rotated by an electric Motor and belt pitch pulley system. Variable speed 2000 RPM to 3500 RPM. Operated on 230V, AC Mains.
Name: RELATIVE DENSITY APPARATUS
Code: 18078
Description: RELATIVE DENSITY APPARATUS, The Equipment consists of one each: Vibratory table with a cushioned steel vibrating deck about 75cm x 75cm. It has a frequency of approx. 3600 vibrations per minute under 115kgs load. Amplitude is variable 0.45mm and 0.45mm to 0.65mm.
Code: 18078
Description: RELATIVE DENSITY APPARATUS, The Equipment consists of one each: Vibratory table with a cushioned steel vibrating deck about 75cm x 75cm. It has a frequency of approx. 3600 vibrations per minute under 115kgs load. Amplitude is variable 0.45mm and 0.45mm to 0.65mm.
Name: AUTOMATIC SAMPLE COMPACTOR
Code: 18079
Description: AUTOMATIC SAMPLE COMPACTOR, For compacting soil into 150mm dia. moulds the rammer feet for 2.6kg. and 4.89kg.
Code: 18079
Description: AUTOMATIC SAMPLE COMPACTOR, For compacting soil into 150mm dia. moulds the rammer feet for 2.6kg. and 4.89kg.
Name: CONSOLIDATION APPARATUS
Code: 18080
Description: CONSOLIDATION APPARATUS, SINGLE / THREE GANG Consists of Loading Unit, maximum capacity 20kg/cm2, consisting of a loading yoke connected to a lever arm with a counter-balancing adjustment and having a lever ratio of 1:10,
Code: 18080
Description: CONSOLIDATION APPARATUS, SINGLE / THREE GANG Consists of Loading Unit, maximum capacity 20kg/cm2, consisting of a loading yoke connected to a lever arm with a counter-balancing adjustment and having a lever ratio of 1:10,
Name: FLEXTURE AND COMPRESSION TESTING MACHINE
Code: 18081
Description: FLEXTURE AND COMPRESSION TESTING MACHINE, Fully automatic test cycle. The complete test cycle is automatically performed by simply pressing the start button. Correct test execution according to selected Standards, is continuously and automatically controlled.
Code: 18081
Description: FLEXTURE AND COMPRESSION TESTING MACHINE, Fully automatic test cycle. The complete test cycle is automatically performed by simply pressing the start button. Correct test execution according to selected Standards, is continuously and automatically controlled.
Name: FLEXTURE TESTING MACHINE
Code: 18081
Description: FLEXTURE TESTING MACHINE, As per IS:516, BS 1881, ASTM C78.capacity of themachine is 0 - 100KN x 1KN.
Code: 18081
Description: FLEXTURE TESTING MACHINE, As per IS:516, BS 1881, ASTM C78.capacity of themachine is 0 - 100KN x 1KN.
Name: MARSHALL STABILITY TEST
Code: 18088
Description: MARSHALL STABILITY TEST, Operation Voltage 230V Single Phase, 50 Cycles AC, but without Proving Ring.
Code: 18088
Description: MARSHALL STABILITY TEST, Operation Voltage 230V Single Phase, 50 Cycles AC, but without Proving Ring.
Name: SOIL DENSITY, CORE CUTTER
Code: 18089
Description: SOIL DENSITY, CORE CUTTER, Made of Mild steel bevelled at one end hardened and with dolly, duly painted, Size: 10cm dia x 12.7cm high.
Code: 18089
Description: SOIL DENSITY, CORE CUTTER, Made of Mild steel bevelled at one end hardened and with dolly, duly painted, Size: 10cm dia x 12.7cm high.
Name: THICKNESS/FLAKINESS GAUGE
Code: 18090-00
Description: THICKNESS/FLAKINESS GAUGE, Used for determining flakiness index of aggregates.They are considered flaky if their thickness is less than 0.6 of their normal size.
Code: 18090-00
Description: THICKNESS/FLAKINESS GAUGE, Used for determining flakiness index of aggregates.They are considered flaky if their thickness is less than 0.6 of their normal size.
Name: CONCRETE REBOUND HAMMER
Code: 18091
Description: CONCRETE REBOUND HAMMER, It is a classic model to test concrete strength. As per ASTM C805, BS 1881:202, For the non destructive testing of surface of hardened concrete in order to evaluate the strength in various parts of structure.
Code: 18091
Description: CONCRETE REBOUND HAMMER, It is a classic model to test concrete strength. As per ASTM C805, BS 1881:202, For the non destructive testing of surface of hardened concrete in order to evaluate the strength in various parts of structure.
