Name: SOIL HYDROMETER
Code: 18035
Description: SOIL HYDROMETER, AS Per IS:2720 (PART VI), Basically used for analysis of grain size distribution of fine grained soil. Range:0.995-1.030
Code: 18035
Description: SOIL HYDROMETER, AS Per IS:2720 (PART VI), Basically used for analysis of grain size distribution of fine grained soil. Range:0.995-1.030
Name: SHRINKAGE LIMIT APPARATUS
Code: 18038
Description: SHRINKAGE LIMIT APPARATUS, As per IS 2720 (Part - V), It is the maximum water content at which a reduction in water does not cause an appreciable reduction in volume of the soil mass.
Code: 18038
Description: SHRINKAGE LIMIT APPARATUS, As per IS 2720 (Part - V), It is the maximum water content at which a reduction in water does not cause an appreciable reduction in volume of the soil mass.
Name: SAMPLING TUBES
Code: 18039
Description: SAMPLING TUBES, Size: 38mm x 150mm, 38mm x 200mm, 38mm x 225mm, 38mm x 300mm
Code: 18039
Description: SAMPLING TUBES, Size: 38mm x 150mm, 38mm x 200mm, 38mm x 225mm, 38mm x 300mm
Name: TRIAXIAL LOADING FRAME
Code: 18041
Description: TRIAXIAL LOADING FRAME, Consists of a Loading Frame motorised capacity 50KN giving 30 rates of strain from 0.00048 mm/min to 6 mm/min.
Code: 18041
Description: TRIAXIAL LOADING FRAME, Consists of a Loading Frame motorised capacity 50KN giving 30 rates of strain from 0.00048 mm/min to 6 mm/min.
Name: AGGREGATE CRUSHING VALUE
Code: 18042
Description: AGGREGATE CRUSHING VALUE, The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under gradually applied compressive load. Aggregate crushing value apparatus As per IS:2386(P-IV) consists of a both end open cylinder. Base plate, a plunger with handle and tamping rod.
Code: 18042
Description: AGGREGATE CRUSHING VALUE, The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under gradually applied compressive load. Aggregate crushing value apparatus As per IS:2386(P-IV) consists of a both end open cylinder. Base plate, a plunger with handle and tamping rod.
Name: AGGREGATE IMPACT TESTER
Code: 18043
Description: AGGREGATE IMPACT TESTER, Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in dia. and 230mm long rounded at one end.
Code: 18043
Description: AGGREGATE IMPACT TESTER, Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in dia. and 230mm long rounded at one end.
Name: TIC PERMEABILITY APPARATUS
Code: 18044-00
Description: TIC PERMEABILITY APPARATUS, As Per IS:2720 (P - XVII). There are two methods for laboratory determination of permeability Constant Head Method & Variable Head Method.
Code: 18044-00
Description: TIC PERMEABILITY APPARATUS, As Per IS:2720 (P - XVII). There are two methods for laboratory determination of permeability Constant Head Method & Variable Head Method.
Name: BLAIN AIR PERMEABILITY APP.
Code: 18045
Description: BLAIN AIR PERMEABILITY APP, As per IS:4031 for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement.
Code: 18045
Description: BLAIN AIR PERMEABILITY APP, As per IS:4031 for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement.
Name: COMPRESSION TESTING MACHINE
Code: 18046
Description: COMPRESSION TESTING MACHINE, Capacity:100 Tons (1000 KN) Four Pillar Model (Single Gauge), 200 Tons (2000 KN) Four Pillar Model (Single/Three Gauge), 300 Tons (3000 KN) Four Pillar Model (Single/Three Gauge)
Code: 18046
Description: COMPRESSION TESTING MACHINE, Capacity:100 Tons (1000 KN) Four Pillar Model (Single Gauge), 200 Tons (2000 KN) Four Pillar Model (Single/Three Gauge), 300 Tons (3000 KN) Four Pillar Model (Single/Three Gauge)
Name: AUTOMATIC COMPRESSION TESTING MACHINE
Code: 18046
Description: AUTOMATIC COMPRESSION TESTING MACHINE, Compression testing frame confirms to IS:14858 (2000) and calibrated with an accuracy of 1%.
Code: 18046
Description: AUTOMATIC COMPRESSION TESTING MACHINE, Compression testing frame confirms to IS:14858 (2000) and calibrated with an accuracy of 1%.
